IANAESTHESIA Cuff pressure Instructions for Use – adjusting cuff pressure 1. Turn on the AG Cuffill by pressing the power button on the right side of the display The display will blink twice showing the number of readings left and then will display “00” 2. Position the piston about half way out. Connect the AG Cuffill to the valve of the pilot balloon 3. Adjust the piston until the required pressure is achieved. If the required pressure is not achieved, disconnect the AG Cuffill, pull the piston 1-2 cc backwards and repeat this step 4. Disconnect the AG Cuffill from the pilot balloon NB: When disconnecting, the cuff pressure may be reduced by 1-2 cm H₂O 1. 2. 3. 4. Instructions for Use – measuring cuff pressure 1. Turn on the AG Cuffill by pressing the power button on the right side of the display The display will blink twice showing the number of readings left and then will display “00” 2. Push the piston to the distal end of the syringe (all the way in) 3. Connect the AG Cuffill to pilot balloon and read the cuff pressure value If required, cuff pressure may be reduced by pulling back the piston until required pressure is achieved 4. Disconnect the AG Cuffill from the cuff inflation line NB: When disconnecting, the cuff pressure may be reduced by 1-2 cm H₂O © KRUUSE · July 2017 · 19974 1. 2. Scan QR code to see the video 3. 4. www.kruuse.com
Download PDF file