Quality Standard 4-6mm mirrors and mirror doors Quality Standard – rev. 25.05.2016 Page: 1 of 3 Initials: TRL Shiny scratches are clear and visible at a distance of 1 metre. Shiny scratches often occur in connection with a hollow in the mirror Edge zone B makes up 1/10 of the width and height of the mirror – see drawing. 5. Types of edges Mirror doors Type of edge Tolerances Sharp edges Sharp edges are not allowed. Must be (all edges uniform and smooth. polished) Residual glue and foil must not be visible at a distance of 1 metre. Will be visible up close and this does not justify complaints. Defect silvering foil on the edge is not allowed. To be assessed according to the method described under item 3. Illustration C edges polished Sharp edges are not allowed. Edges must be uniform and smooth. Residual glue and foil must not be visible at a distance of 1 metre. Will be visible up close and this does not justify complaints. Defect silvering foil on the edge is not allowed. To be assessed according to the method described under item 3. 2
Download PDF file